TAP Services(865) 919-6674

TAP Services

26303-11 Lighting Applications

1. Corridor lighting levels in the public areas of a building should have at least ________.

Question 1 of 20

2. Which of the following is a common name for a wall-mounted lighting fixture?

Question 2 of 20

3. Lighting fixtures that distribute 90% to 100% of their emitted light below the horizontal plane are classified as ________.

Question 3 of 20

4. Which of the following is the unit used to measure the illuminance or amount of total light per unit area that falls on a surface?

Question 4 of 20

5. When mounted above eye level, which of the following are normally equipped with some bottom shielding, such as a louver or diffuser?

Question 5 of 20

6. Lighting fixtures installed in houses and apartments are classified as being used in ________.

Question 6 of 20

7. Lighting fixtures that distribute 60% to 90% of their emitted light downward but also distribute 10% to 40% upward to illuminate the ceiling are classified as ________.

Question 7 of 20

8. Incandescent ceiling-mounted fixtures equipped with diffusers are used to provide ________.

Question 8 of 20

9. Task lighting is used to ________.

Question 9 of 20

10. The classification of an area as being hazardous with regard to the installation of lighting fixtures is the responsibility of the insurance company, authority having jurisdiction, or ________.

Question 10 of 20

11. Lighting that provides the minimum light levels needed to assist people when exiting a building is classified as ________.

Question 11 of 20

12. A location that is hazardous because of the presence of combustible dust is defined as a ________.

Question 12 of 20

13. Magnetic dimming ballasts allow fluorescent lamps to be safely dimmed to what percentage of their full light output?

Question 13 of 20

14. Which of the following types of lighting fixtures is most likely to be used to provide general illumination in patient observation areas in a health care facility?

Question 14 of 20

15. The basic measure of the amount of light produced by a light source is called the ________.

Question 15 of 20

16. Task area fluorescent fixtures are generally two-, three-, or four-lamp fixtures made in lengths of ________.

Question 16 of 20

17. An incandescent light may be dimmed by ________.

Question 17 of 20

18. The intensity of a light source in a given direction is called ________.

Question 18 of 20

19. Lighting that uses fixtures above the visual task area that also contributes to the lighting in the local area is classified as ________.

Question 19 of 20

20. Which of the following is used in HID dimming circuits to detect movement as people enter and to bring the aisle lighting to full luminance?

Question 20 of 20


 

Our Clients
Mailing List

Sign up for our mailing list today!

FOLLOW US ON SOCIAL MEDIA
 
 
 
 
3d person on book
Quick Nav
TAP Services
(865) 919-6674 phone Contact Us

This site is proudly hosted and designed by Globotech Solutions. All content Copyright © 2025, TAP Services.