TAP Services(865) 919-6674

26405-11 Fire Alarm Systems

1. The force required to operate a manual pull station must be no more than ________.

Question 1 of 20

2. Which of the following pull stations require the user to lift a cover or open a door before operating the pull station?

Question 2 of 20

3. Smoke detectors can malfunction if placed in temperatures above ________.

Question 3 of 20

4. All residential alarm-sounding devices must have a minimum rating of ________.

Question 4 of 20

5. In some conventional fire alarm systems using a positive alarm sequence, alarm delay is usually adjustable for a period of up to ________.

Question 5 of 20

6. Which of the following activate when the temperature exceeds a preset level?

Question 6 of 20

7. Fire alarm system digital communicators can send and receive data over telephone lines by using a connecting device identified as ________.

Question 7 of 20

8. An automatic detector in which detection is continuous along the entire length of the detector is a(n) ________.

Question 8 of 20

9. NFPA 72® contains ________.

Question 9 of 20

10. Spot detectors containing a light source and a photosensitive device on which light rays do not normally fall operate on the ________.

Question 10 of 20

11. Building control circuit wiring that is both powered and controlled by the fire alarm system is governed by ________.

Question 11 of 20

12. The standby time for operation of an alarm system on secondary power is defined in ________.

Question 12 of 20

13. For smoke chamber definition purposes, if the space between the top of a low wall and the ceiling is less than 18", the wall is considered a(n) ________.

Question 13 of 20

14. NFPA 101® contains ________.

Question 14 of 20

15. The main components of a fire alarm system include alarm initiating devices, notification appliances, and ________.

Question 15 of 20

16. Which of the following SLC classes is the most common and has six different styles?

Question 16 of 20

17. Any outdoor wiring for fire alarm circuits extending beyond one building is governed by ________.

Question 17 of 20

18. A fire alarm system that permits discrete identification of alarm signals at the detector level is a(n) ________.

Question 18 of 20

19. Most analog addressable systems operate on a ________.

Question 19 of 20

20. A system that can be used to give instructions to building occupants in the event of an emergency is called a(n) ________.

Question 20 of 20