TAP Services(865) 919-6674

TAP Services

26203-11 Electric Lighting

1. Compared to standard incandescent lamps, which of the following provides longer life and improved light quality when used in a lamp?

Question 1 of 25

2. When used outdoors, photosensors should be aimed due ________.

Question 2 of 25

3. Which type of ballast has the highest efficiency?

Question 3 of 25

4. Unless it is protected or is a low-voltage type of track, track lighting on a wall must be installed at least ________.

Question 4 of 25

5. Which of the following will shorten the life of a filament in an incandescent lamp?

Question 5 of 25

6. The type of high-intensity discharge (HID. lamp that has excellent color rendition is the ________.

Question 6 of 25

7. Which of the following is an HID ballast category?

Question 7 of 25

8. Which section of the NEC® requires that at least 6" of free conductor length be left at each outlet box when cutting the branch circuit wires in preparation for connecting a light fixture?

Question 8 of 25

9. Which of the following materials absorbs the most light?

Question 9 of 25

10. When white light is passed through a prism, how many total colors are visible?

Question 10 of 25

11. Chandeliers are a type of ________.

Question 11 of 25

12. In an office where people sit quietly at desks from 8:30 a.m. to 5:00 p.m., which type of lighting control would be most efficient in turning off the lights when they were not needed?

Question 12 of 25

13. Which color temperature produces a balance between warmth and coolness?

Question 13 of 25

14. NEC Article 410 contains requirements for installing ________.

Question 14 of 25

15. Which lamp produces a cool color tone?

Question 15 of 25

16. NEC® requirements must be adhered to when installing incandescent recessed lighting fixtures because they ________.

Question 16 of 25

17. Light enters the eye through a transparent layer called the ________.

Question 17 of 25

18. When installing a surface-mounted fixture weighing more than 50 pounds, it ________.

Question 18 of 25

19. Which of the following should be at least 18" in length when used to connect a junction box mounted above a suspended ceiling to a fixture installed in a suspended ceiling?

Question 19 of 25

20. Ultrasonic occupancy sensors are triggered by ________.

Question 20 of 25

21. Fluorescent lamps with a single pin at each end are known as ________.

Question 21 of 25

22. Which of the following are often used in conjunction with time clocks to turn off lighting when it is no longer needed?

Question 22 of 25

23. Which of the following describes a color temperature of 4,100K and higher?

Question 23 of 25

24. The junction box and recessed lighting fixture should be separated by a minimum distance of ________.

Question 24 of 25

25. Which of the following contain ballasts that provide high voltage across the lamp's electrodes at startup, causing them to emit electrons?

Question 25 of 25


 

Our Clients
Mailing List

Sign up for our mailing list today!

FOLLOW US ON SOCIAL MEDIA
 
 
 
 
3d person on book
Quick Nav
TAP Services
(865) 919-6674 phone Contact Us

This site is proudly hosted and designed by Globotech Solutions. All content Copyright © 2025, TAP Services.