TAP Services(865) 919-6674

26310-11 Voice Data and Video

1. Most straight-through patch cords for Cat 3, 5e, and 6 cable, including commercial patch cords, are wired to the ________.

Question 1 of 15

2. All incoming conduit to the equipment/telecom room should include ________.

Question 2 of 15

3. Any penetrations through walls or floors required for the riser pathways must be neatly sleeved and ________.

Question 3 of 15

4. The most common type of RG6 used in structured cabling systems is ________.

Question 4 of 15

5. Which of the following types of RG6 coax connector do most professional installers use?

Question 5 of 15

6. Materials or mechanical devices used to block openings in walls, ceilings, or floors to prevent the passage of fire or smoke are called ________.

Question 6 of 15

7. Telecom innerduct for campus backbone subsystems should be labeled within how many inches of the termination point?

Question 7 of 15

8. RG6 cables typically use which of the following types of connectors?

Question 8 of 15

9. The support structure for a horizontal subsystem can consist of J-hooks, ladder racks/trays, bags, and ________.

Question 9 of 15

10. Telecom cables in an ER or TR subsystem should be kept at least how many inches away from motors and transformers?

Question 10 of 15

11. Vertical fiber-optic cable should be clamped every ________.

Question 11 of 15

12. Fiber-optic cable that consists of two cables is called ________.

Question 12 of 15

13. Which of the following describes the work area subsystem?

Question 13 of 15

14. Which of the following categories of UTP cable has transmission rates of up to 16MHz and is typically used for Ethernet networks?

Question 14 of 15

15. Horizontal subsystem conduit is limited to how many 90-degree bends between pull points or boxes?

Question 15 of 15