TAP Services(865) 919-6674

TAP Services

26402-11 Health Care Facilities

1. Any facility that admits patients on electrical life support equipment must have a ________.

Question 1 of 25

2. Where receptacles will power digital electronic equipment, which of the following receptacles should be used?

Question 2 of 25

3. A room in which volatile flammable disinfecting agents are stored is considered a Class I, Division 1 location ________.

Question 3 of 25

4. A medication preparation area in a nursing home may have alternate power connected via a delayed automatic transfer device during a power failure in a ________.

Question 4 of 25

5. A No. 1 isolated conductor must be identified using which of the following colors?

Question 5 of 25

6. Power to low-voltage equipment must be supplied from a(n) ________.

Question 6 of 25

7. In a health care facility, a television is an example of a(n) ________.

Question 7 of 25

8. In a Type 3 EES, battery backup power must last for at least ________.

Question 8 of 25

9. For X-ray equipment, the current rating of overcurrent protective devices must be the greater of at least 50% of the momentary rating or ________.

Question 9 of 25

10. Line isolation monitors must have a green signal lamp that glows when the system is isolated from ground and located ________.

Question 10 of 25

11. Individual branch circuits are not required for portable X-ray equipment requiring no more than ________.

Question 11 of 25

12. Which of the following supplies power to the areas that are directly related to patient care, including emergency rooms and pharmacies?

Question 12 of 25

13. In a medical facility, receptacles should be mounted how many inches above the floor?

Question 13 of 25

14. Hospital-grade receptacles are ________.

Question 14 of 25

15. Health care facilities are often supplied by two or more distribution points; this is known as a(n) ________.

Question 15 of 25

16. In patient care areas, light fixtures are not required to be grounded using an insulated grounding conductor when they are more than how many feet above the floor?

Question 16 of 25

17. To limit impedance, which of the following should be sized at 10kVA or less?

Question 17 of 25

18. Low-voltage equipment that is typically in contact with patients must be moisture-resistant and operate on ________.

Question 18 of 25

19. An equipotential ground plane ________.

Question 19 of 25

20. Patient bed locations in non-critical areas must have a minimum of ________.

Question 20 of 25

21. The life safety branch of an EES provides power to ________.

Question 21 of 25

22. Which part of an EES supplies power to major electrical equipment necessary for patient care and basic hospital operations?

Question 22 of 25

23. Installation of X-ray equipment is governed by ________.

Question 23 of 25

24. In addition to the NEC®, emergency electrical power for hospitals is governed by the ________.

Question 24 of 25

25. Which of the following statements is true about Type MC cable in patient care areas?

Question 25 of 25


 

Our Clients
Mailing List

Sign up for our mailing list today!

FOLLOW US ON SOCIAL MEDIA
 
 
 
 
3d person on book
Quick Nav
TAP Services
(865) 919-6674 phone Contact Us

This site is proudly hosted and designed by Globotech Solutions. All content Copyright © 2025, TAP Services.